Shop Table Heavy Duty 4x4 Corner Brackets for 4 x 4 Posts | DIY Workbench | Pergola Bracket | Made In the USA!…

Use these brackets to build your own Shop Table, Garage Workbench, CNC Table, Backyard Deck, or Pergola. Made with Heavy Duty 12-gauge steel, almost 1/8” thick, made in the USA, with USA Made Steel! * Sold Individually* Mounting holes sized to be installed using 1/2" lag screws or 1/2" thru bolts. You can also weld the brackets if you want to build your table out of metal supports. Mounting/attachment hardware not included. We can also make custom brackets for your project, just shoot us a message with a diagram and quantity of what you are needing, and we will give you a quote.
Brackets we offer:
Corner Brackets – Designed to fit over 4 x 4 posts. (Actual wood dimensions 3.5” x 3.5”) Brackets are 14” x 7”, they are then bent at a 90-degree angle to fit over 4x4 posts with actual dimensions of 3.5” x 3.5”. There are three (3) holes on each of the top legs for attaching to cross members and four holes on the bottom leg (2 on each side) for mounting to the leg. (Note: The leg holes are offset):
Flat T brackets –A T shape Flat Bracket to add strength to a joint:
Bent L’s – A bracket bent at 90 degrees to use where you want to add strength to an inside corner:
Flat L’s - Flat L shaped bracket, used to add strength to an outside joint.
Note: Our brackets are made from 12-gauge USA Made Steel. They may contain scratches and marks and are shipped in their raw steel form unless you choose for us to powder coat them. If left raw steel as they are shipped, they will rust and get a natural patina if not painted or treated.